rancher-partner-charts/charts/citrix/citrix-ingress-controller

Citrix Ingress Controller

Citrix provides an Ingress Controller for Citrix ADC MPX (hardware), Citrix ADC VPX (virtualized), and Citrix ADC CPX (containerized) for bare metal and cloud deployments. It configures one or more Citrix ADC based on the Ingress resource configuration in Kubernetes or in OpenShift cluster.

TL;DR;

For Kubernetes

helm repo add citrix https://citrix.github.io/citrix-helm-charts/

helm install cic citrix/citrix-ingress-controller --set nsIP=<NSIP>,license.accept=yes,adcCredentialSecret=<Secret-for-ADC-credentials>

To install Citrix Provided Custom Resource Definition(CRDs) along with Citrix Ingress Controller

helm install cic citrix/citrix-ingress-controller --set nsIP=<NSIP>,license.accept=yes,adcCredentialSecret=<Secret-for-ADC-credentials>,crds.install=true

For OpenShift

helm repo add citrix https://citrix.github.io/citrix-helm-charts/

helm install cic citrix/citrix-ingress-controller --set nsIP=<NSIP>,license.accept=yes,adcCredentialSecret=<Secret-for-ADC-credentials>,openshift=true

To install Citrix Provided Custom Resource Definition(CRDs) along with Citrix Ingress Controller

helm install cic citrix/citrix-ingress-controller --set nsIP=<NSIP>,license.accept=yes,adcCredentialSecret=<Secret-for-ADC-credentials>,openshift=true,crds.install=true

Important:

The license.accept argument is mandatory. Ensure that you set the value as yes to accept the terms and conditions of the Citrix license.

Introduction

This Helm chart deploys Citrix ingress controller in the Kubernetes or in the Openshift cluster using Helm package manager.

Prerequisites

• The Kubernetes version should be 1.16 and above if using Kubernetes environment.

• The Openshift version 4.8 or later if using OpenShift platform.

• The Helm version 3.x or later. You can follow instruction given here to install the same.

• You determine the NS_IP IP address needed by the controller to communicate with Citrix ADC. The IP address might be anyone of the following depending on the type of Citrix ADC deployment:

  • (Standalone appliances) NSIP - The management IP address of a standalone Citrix ADC appliance. For more information, see IP Addressing in Citrix ADC.

  • (Appliances in High Availability mode) SNIP - The subnet IP address. For more information, see IP Addressing in Citrix ADC.

  • (Appliances in Clustered mode) CLIP - The cluster management IP (CLIP) address for a clustered Citrix ADC deployment. For more information, see IP addressing for a cluster.

• You have installed Prometheus Operator, if you want to view the metrics of the Citrix ADC CPX collected by the metrics exporter.

• The user name and password of the Citrix ADC VPX or MPX appliance used as the ingress device. The Citrix ADC appliance needs to have system user account (non-default) with certain privileges so that Citrix ingress controller can configure the Citrix ADC VPX or MPX appliance. For instructions to create the system user account on Citrix ADC, see Create System User Account for CIC in Citrix ADC.

  You can pass user name and password using Kubernetes secrets. Create a Kubernetes secret for the user name and password using the following command:

     kubectl create secret generic nslogin --from-literal=username='cic' --from-literal=password='mypassword'
  

Create system User account for Citrix ingress controller in Citrix ADC

Citrix ingress controller configures the Citrix ADC using a system user account of the Citrix ADC. The system user account should have certain privileges so that the CIC has permission configure the following on the Citrix ADC:

• Add, Delete, or View Content Switching (CS) virtual server
• Configure CS policies and actions
• Configure Load Balancing (LB) virtual server
• Configure Service groups
• Cofigure SSl certkeys
• Configure routes
• Configure user monitors
• Add system file (for uploading SSL certkeys from Kubernetes)
• Configure Virtual IP address (VIP)
• Check the status of the Citrix ADC appliance

Note:

The system user account would have privileges based on the command policy that you define.

To create the system user account, do the following:

1. Log on to the Citrix ADC appliance. Perform the following:

   1. Use an SSH client, such as PuTTy, to open an SSH connection to the Citrix ADC appliance.

   2. Log on to the appliance by using the administrator credentials.

2. Create the system user account using the following command:

      add system user <username> <password>
   

   For example:

      add system user cic mypassword
   

3. Create a policy to provide required permissions to the system user account. Use the following command:

     add cmdpolicy cic-policy ALLOW '^(\?!shell)(\?!sftp)(\?!scp)(\?!batch)(\?!source)(\?!.*superuser)(\?!.*nsroot)(\?!install)(\?!show\s+system\s+(user|cmdPolicy|file))(\?!(set|add|rm|create|export|kill)\s+system)(\?!(unbind|bind)\s+system\s+(user|group))(\?!diff\s+ns\s+config)(\?!(set|unset|add|rm|bind|unbind|switch)\s+ns\s+partition).*|(^install\s*(wi|wf))|(^\S+\s+system\s+file)^(\?!shell)(\?!sftp)(\?!scp)(\?!batch)(\?!source)(\?!.*superuser)(\?!.*nsroot)(\?!install)(\?!show\s+system\s+(user|cmdPolicy|file))(\?!(set|add|rm|create|export|kill)\s+system)(\?!(unbind|bind)\s+system\s+(user|group))(\?!diff\s+ns\s+config)(\?!(set|unset|add|rm|bind|unbind|switch)\s+ns\s+partition).*|(^install\s*(wi|wf))|(^\S+\s+system\s+file)'
   

   Note: The system user account would have privileges based on the command policy that you define. The command policy mentioned in step 3 is similar to the built-in sysAdmin command policy with another permission to upload files.

   The command policy spec provided above have already escaped special characters for easier copy pasting into the Citrix ADC command line.

   For configuring the command policy from Citrix ADC Configuration Wizard (GUI), use the below command policy spec.

     ^(?!shell)(?!sftp)(?!scp)(?!batch)(?!source)(?!.*superuser)(?!.*nsroot)(?!install)(?!show\s+system\s+(user|cmdPolicy|file))(?!(set|add|rm|create|export|kill)\s+system)(?!(unbind|bind)\s+system\s+(user|group))(?!diff\s+ns\s+config)(?!(set|unset|add|rm|bind|unbind|switch)\s+ns\s+partition).*|(^install\s*(wi|wf))|(^\S+\s+system\s+file)^(?!shell)(?!sftp)(?!scp)(?!batch)(?!source)(?!.*superuser)(?!.*nsroot)(?!install)(?!show\s+system\s+(user|cmdPolicy|file))(?!(set|add|rm|create|export|kill)\s+system)(?!(unbind|bind)\s+system\s+(user|group))(?!diff\s+ns\s+config)(?!(set|unset|add|rm|bind|unbind|switch)\s+ns\s+partition).*|(^install\s*(wi|wf))|(^\S+\s+system\s+file)
   

4. Bind the policy to the system user account using the following command:

      bind system user cic cic-policy 0
   

Installing the Chart

Add the Citrix Ingress Controller helm chart repository using command:

   helm repo add citrix https://citrix.github.io/citrix-helm-charts/

For Kubernetes:

1. Citrix Ingress Controller

To install the chart with the release name, my-release, use the following command:

helm install my-release citrix/citrix-ingress-controller --set nsIP=<NSIP>,license.accept=yes,adcCredentialSecret=<Secret-for-ADC-credentials>,ingressClass[0]=<ingressClassName>

Note:

By default the chart installs the recommended RBAC roles and role bindings.

The command deploys Citrix ingress controller on Kubernetes cluster with the default configuration. The configuration section lists the mandatory and optional parameters that you can configure during installation.

2. Citrix Ingress Controller with Exporter

Metrics exporter can be deployed along with Citrix ingress controller and collects metrics from the Citrix ADC instances. You can then visualize these metrics using Prometheus Operator and Grafana.

Note: Ensure that you have installed Prometheus Operator.

Use the following command for this:

helm install my-release citrix/citrix-ingress-controller --set nsIP=<NSIP>,license.accept=yes,adcCredentialSecret=<Secret-for-ADC-credentials>,ingressClass[0]=<ingressClassName>,exporter.required=true

For Openshift:

Add the name of the service account created when the chart is deployed to the privileged Security Context Constraints of OpenShift:

oc adm policy add-scc-to-user privileged system:serviceaccount:<namespace>:<service-account-name>

1. Citrix Ingress Controller

To install the chart with the release name, my-release, use the following command:

helm install my-release citrix/citrix-ingress-controller --set nsIP=<NSIP>,license.accept=yes,adcCredentialSecret=<Secret-for-ADC-credentials>,openshift=true

The command deploys Citrix ingress controller on your Openshift cluster in the default configuration. The configuration section lists the mandatory and optional parameters that you can configure during installation.

2. Citrix Ingress Controller with Exporter

Metrics exporter can be deployed along with Citrix ingress controller and collects metrics from the Citrix ADC instances. You can then visualize these metrics using Prometheus Operator and Grafana.

Note: Ensure that you have installed Prometheus Operator

Use the following command for this:

helm install my-release citrix/citrix-ingress-controller --set nsIP=<NSIP>,license.accept=yes,adcCredentialSecret=<Secret-for-ADC-credentials>,openshift=true,exporter.required=true

Installed components

The following components are installed:

• Citrix ingress controller
• Exporter (if enabled)

Configuration for ServiceGraph:

If Citrix ADC VPX/MPX need to send data to the Citrix ADM to bring up the servicegraph, then the below steps can be followed to install Citrix ingress controller for Citrix ADC VPX/MPX. Citrix ingress controller configures Citrix ADC VPX/MPX with the configuration required for servicegraph.

1. Create secret using Citrix ADC VPX credentials, which will be used by Citrix ingress controller for configuring Citrix ADC VPX/MPX:

kubectl create secret generic nslogin --from-literal=username='cic' --from-literal=password='mypassword'

2. Deploy Citrix ingress controller using helm command:

helm install my-release citrix/citrix-ingress-controller --set nsIP=<NSIP>,nsVIP=<NSVIP>,license.accept=yes,adcCredentialSecret=<Secret-of-Citrix-ADC-credentials>,analyticsConfig.required=true,analyticsConfig.timeseries.metrics.enable=true,analyticsConfig.timeseries.port=5563,analyticsConfig.distributedTracing.enable=true,analyticsConfig.transactions.enable=true,analyticsConfig.transactions.port=5557,analyticsConfig.endpoint.server=<ADM-Agent-IP>

Note: If container agent is being used here for Citrix ADM, please provide podIP of container agent in the analyticsConfig.endpoint.server parameter.

CRDs configuration

CRDs can be installed/upgraded when we install/upgrade Citrix ingress controller using crds.install=true parameter in Helm. If you do not want to install CRDs, then set the option crds.install to false. By default, CRDs too get deleted if you uninstall through Helm. This means, even the CustomResource objects created by the customer will get deleted. If you want to avoid this data loss set crds.retainOnDelete to true.

Note: Installing again may fail due to the presence of CRDs. Make sure that you back up all CustomResource objects and clean up CRDs before re-installing Citrix Ingress Controller.

There are a few examples of how to use these CRDs, which are placed in the folder: Example-CRDs. Refer to them and install as needed, using the following command: kubectl create -f <crd-example.yaml>

Details of the supported CRDs:

authpolicies CRD:

Authentication policies are used to enforce access restrictions to resources hosted by an application or an API server.

Citrix provides a Kubernetes CustomResourceDefinitions (CRDs) called the Auth CRD that you can use with the Citrix ingress controller to define authentication policies on the ingress Citrix ADC.

Example file: auth_example.yaml

continuousdeployments CRD for canary:

Canary release is a technique to reduce the risk of introducing a new software version in production by first rolling out the change to a small subset of users. After user validation, the application is rolled out to the larger set of users. Citrix ADC-Integrated Canary Deployment solution stitches together all components of continuous delivery (CD) and makes canary deployment easier for the application developers.

httproutes and listeners CRDs for contentrouting:

Content Routing (CR) is the execution of defined rules that determine the placement and configuration of network traffic between users and web applications, based on the content being sent. For example, a pattern in the URL or header fields of the request.

Example files: HTTPRoute_crd.yaml, Listener_crd.yaml

ratelimits CRD:

In a Kubernetes deployment, you can rate limit the requests to the resources on the back end server or services using rate limiting feature provided by the ingress Citrix ADC.

Example files: ratelimit-example1.yaml, ratelimit-example2.yaml

vips CRD:

Citrix provides a CustomResourceDefinitions (CRD) called VIP for asynchronous communication between the IPAM controller and Citrix ingress controller.

The IPAM controller is provided by Citrix for IP address management. It allocates IP address to the service from a defined IP address range. The Citrix ingress controller configures the IP address allocated to the service as virtual IP (VIP) in Citrix ADX VPX. And, the service is exposed using the IP address.

When a new service is created, the Citrix ingress controller creates a CRD object for the service with an empty IP address field. The IPAM Controller listens to addition, deletion, or modification of the CRD and updates it with an IP address to the CRD. Once the CRD object is updated, the Citrix ingress controller automatically configures Citrix ADC-specfic configuration in the tier-1 Citrix ADC VPX.

rewritepolicies CRD:

In kubernetes environment, to deploy specific layer 7 policies to handle scenarios such as, redirecting HTTP traffic to a specific URL, blocking a set of IP addresses to mitigate DDoS attacks, imposing HTTP to HTTPS and so on, requires you to add appropriate libraries within the microservices and manually configure the policies. Instead, you can use the Rewrite and Responder features provided by the Ingress Citrix ADC device to deploy these policies.

Example files: target-url-rewrite.yaml

wafs CRD:

WAF CRD can be used to configure the web application firewall policies with the Citrix ingress controller on the Citrix ADC VPX, MPX, SDX, and CPX. The WAF CRD enables communication between the Citrix ingress controller and Citrix ADC for enforcing web application firewall policies.

In a Kubernetes deployment, you can enforce a web application firewall policy to protect the server using the WAF CRD. For more information about web application firewall, see Web application security.

Example files: wafhtmlxsssql.yaml

apigateway CRD:

API Gateway CRD is used to configure gitops framework on citrix API gateway. This solution enables citrix ingress controller to generate API gateway configurations out of Open API Specification documents checked in to git repository by API developers and designers.

Example files: api-gateway-crd-instance.yaml

bots CRD:

BOT CRD You can use Bot CRDs to configure the bot management policies with the Citrix ingress controller on the Citrix ADC VPX. The Bot custom resource definition enables communication between the Citrix ingress controller and Citrix ADC for enforcing bot management policies.

In a Kubernetes deployment, you can enforce bot management policy on therequests and responses from and to the server using the Bot CRDs. For more information on security vulnerabilities, see Bot Detection.

Example files: botallowlist.yaml

CORS CRD:

CORS CRD Cross-origin resource sharing (CORS) is a mechanism allows a web application running under one domain to securely access resources in another domain. You can configure CORS policies on Citrix ADC using Citrix ingress controller to allow one domain (the origin domain) to call APIs in another domain. For more information, see the cross-origin resource sharing CRD documentation.

Example files: cors-crd.yaml

APPQOE CRD:

APPQOE CRD When a Citrix ADC appliance receives an HTTP request and forwards it to a back-end server, sometimes there may be connection failures with the back-end server. You can configure the request-retry feature on Citrix ADC to forward the request to the next available server, instead of sending the reset to the client. Hence, the client saves round trip time when Citrix ADC initiates the same request to the next available service. For more information, see the AppQoE support documentation. Appqoe resource sharing CRD documentation.

Example files: appqoe-crd.yaml

WILDCARDDNS CRD:

WILDCARDDNS CRD Wildcard DNS domains are used to handle requests for nonexistent domains and subdomains. In a zone, use wildcard domains to redirect queries for all nonexistent domains or subdomains to a particular server, instead of creating a separate Resource Record (RR) for each domain. The most common use of a wildcard DNS domain is to create a zone that can be used to forward mail from the internet to some other mail system. For more information, see the Wild card DNS domains support documentation. Wildcard DNS Entry CRD documentation.

Example files: wildcarddns-crd.yaml

Tolerations

Taints are applied on cluster nodes whereas tolerations are applied on pods. Tolerations enable pods to be scheduled on node with matching taints. For more information see Taints and Tolerations in Kubernetes.

Toleration can be applied to Citrix ingress controller pod using tolerations argument while deploying CIC using helm chart. This argument takes list of tolerations that user need to apply on the CIC pods.

For example, following command can be used to apply toleration on the CIC pod:

helm install my-release citrix/citrix-ingress-controller --set nsIP=<NSIP>,license.accept=yes,adcCredentialSecret=<Secret-for-ADC-credentials>,tolerations[0].key=<toleration-key>,tolerations[0].value=<toleration-value>,tolerations[0].operator=<toleration-operator>,tolerations[0].effect=<toleration-effect>

Here tolerations[0].key, tolerations[0].value and tolerations[0].effect are the key, value and effect that was used while tainting the node. Effect represents what should happen to the pod if the pod don't have any matching toleration. It can have values NoSchedule, NoExecute and PreferNoSchedule. Operator represents the operation to be used for key and value comparison between taint and tolerations. It can have values Exists and Equal. The default value for operator is Equal.

Configuration

The following table lists the mandatory and optional parameters that you can configure during installation:

Parameters	Mandatory or Optional	Default value	Description
license.accept	Mandatory	no	Set yes to accept the CIC end user license agreement.
imageRegistry	Mandatory	quay.io	The Citrix ingress controller image registry
imageRepository	Mandatory	citrix/citrix-k8s-ingress-controller	The Citrix ingress controller image repository
imageTag	Mandatory	1.27.15	The Citrix ingress controller image tag
pullPolicy	Mandatory	IfNotPresent	The CIC image pull policy.
imagePullSecrets	Optional	N/A	Provide list of Kubernetes secrets to be used for pulling the images from a private Docker registry or repository. For more information on how to create this secret please see Pull an Image from a Private Registry.
nameOverride	Optional	N/A	String to partially override deployment fullname template with a string (will prepend the release name)
fullNameOverride	Optional	N/A	String to fully override deployment fullname template with a string
resources	Optional	{}	CPU/Memory resource requests/limits for Citrix Ingress Controller container
adcCredentialSecret	Mandatory	N/A	The secret key to log on to the Citrix ADC VPX or MPX. For information on how to create the secret keys, see Prerequisites.
secretStore.enabled	Optional	False	Set to "True" for deploying other Secret Provider classes
secretStore.username	Optional	N/A	if secretStore.enabled, username of ADC will be fetched from the Secret Provider
secretStore.password	Optional	N/A	if secretStore.enabled, password of ADC will be fetched from the Secret Provider
nsIP	Mandatory	N/A	The IP address of the Citrix ADC device. For details, see Prerequisites.
nsVIP	Optional	N/A	The Virtual IP address on the Citrix ADC device.
nsSNIPS	Optional	N/A	The list of subnet IPAddresses on the Citrix ADC device, which will be used to create PBR Routes instead of Static Routes PBR support
nsPort	Optional	443	The port used by CIC to communicate with Citrix ADC. You can use port 80 for HTTP.
nsProtocol	Optional	HTTPS	The protocol used by CIC to communicate with Citrix ADC. You can also use HTTP on port 80.
nsEnableLabel	Optional	True	Set to true for plotting Servicegraph. Ensure ``analyticsConfig` are set.
nitroReadTimeout	Optional	20	The nitro Read timeout in seconds, defaults to 20
logLevel	Optional	DEBUG	The loglevel to control the logs generated by CIC. The supported loglevels are: CRITICAL, ERROR, WARNING, INFO, DEBUG and TRACE. For more information, see Logging.
jsonLog	Optional	false	Set this argument to true if log messages are required in JSON format
nsConfigDnsRec	Optional	false	To enable/disable DNS address Record addition in ADC through Ingress
nsSvcLbDnsRec	Optional	false	To enable/disable DNS address Record addition in ADC through Type Load Balancer Service
nsDnsNameserver	Optional	N/A	To add DNS Nameservers in ADC
optimizeEndpointBinding	Optional	false	To enable/disable binding of backend endpoints to servicegroup in a single API-call. Recommended when endpoints(pods) per application are large in number. Applicable only for Citrix ADC Version >=13.0-45.7
kubernetesURL	Optional	N/A	The kube-apiserver url that CIC uses to register the events. If the value is not specified, CIC uses the internal kube-apiserver IP address.
clusterName	Optional	N/A	The unique identifier of the kubernetes cluster on which the CIC is deployed. Used in multi-cluster deployments.
ingressClass	Optional	N/A	If multiple ingress load balancers are used to load balance different ingress resources. You can use this parameter to specify CIC to configure Citrix ADC associated with specific ingress class. For more information on Ingress class, see Ingress class support. For Kubernetes version >= 1.19, this will create an IngressClass object with the name specified here
setAsDefaultIngressClass	Optional	False	Set the IngressClass object as default ingress class. New Ingresses without an "ingressClassName" field specified will be assigned the class specified in ingressClass. Applicable only for kubernetes versions >= 1.19
serviceClass	Optional	N/A	By Default ingress controller configures all TypeLB Service on the ADC. You can use this parameter to finetune this behavior by specifing CIC to only configure TypeLB Service with specific service class. For more information on Service class, see Service class support.
nodeWatch	Optional	false	Use the argument if you want to automatically configure network route from the Ingress Citrix ADC VPX or MPX to the pods in the Kubernetes cluster. For more information, see Automatically configure route on the Citrix ADC instance.
cncPbr	Optional	False	Use this argument to inform CIC that Citrix Node Controller(CNC) is configuring Policy Based Routes(PBR) on the Citrix ADC. For more information, see CNC-PBR-SUPPORT
defaultSSLCertSecret	Optional	N/A	Provide Kubernetes secret name that needs to be used as a default non-SNI certificate in Citrix ADC.
podIPsforServiceGroupMembers	Optional	False	By default Citrix Ingress Controller will add NodeIP and NodePort as service group members while configuring type LoadBalancer Services and NodePort services. This variable if set to True will change the behaviour to add pod IP and Pod port instead of nodeIP and nodePort. Users can set this to True if there is a route between ADC and K8s clusters internal pods either using feature-node-watch argument or using Citrix Node Controller.
ignoreNodeExternalIP	Optional	False	While adding NodeIP, as Service group members for type LoadBalancer services or NodePort services, Citrix Ingress Controller has a selection criteria whereas it choose Node ExternalIP if available and Node InternalIP, if Node ExternalIP is not present. But some users may want to use Node InternalIP over Node ExternalIP even if Node ExternalIP is present. If this variable is set to True, then it prioritises the Node Internal IP to be used for service group members even if node ExternalIP is present
nsHTTP2ServerSide	Optional	OFF	Set this argument to ON for enabling HTTP2 for Citrix ADC service group configurations.
nsCookieVersion	Optional	0	Specify the persistence cookie version (0 or 1).
ipam	Optional	False	Set this argument if you want to use the IPAM controller to automatically allocate an IP address to the service of type LoadBalancer.
disableAPIServerCertVerify	Optional	False	Set this parameter to True for disabling API Server certificate verification.
logProxy	Optional	N/A	Provide Elasticsearch or Kafka or Zipkin endpoint for Citrix observability exporter.
entityPrefix	Optional	k8s	The prefix for the resources on the Citrix ADC VPX/MPX.
updateIngressStatus	Optional	True	Set this argurment if Status.LoadBalancer.Ingress field of the Ingress resources managed by the Citrix ingress controller needs to be updated with allocated IP addresses. For more information see this.
routeLabels	Optional	N/A	You can use this parameter to provide the route labels selectors to be used by Citrix Ingress Controller for routeSharding in OpenShift cluster.
namespaceLabels	Optional	N/A	You can use this parameter to provide the namespace labels selectors to be used by Citrix Ingress Controller for routeSharding in OpenShift cluster.
podAnnotations	Optional	N/A	Map of annotations to add to the pods.
affinity	Optional	N/A	Affinity labels for pod assignment.
exporter.required	Optional	false	Use the argument, if you want to run the Exporter for Citrix ADC Stats along with CIC to pull metrics for the Citrix ADC VPX or MPX
exporter.imageRegistry	Optional	quay.io	The Exporter for Citrix ADC Stats image registry
exporter.imageRepository	Optional	citrix/citrix-adc-metrics-exporter	The Exporter for Citrix ADC Stats image repository
exporter.imageTag	Optional	1.4.9	The Exporter for Citrix ADC Stats image tag
exporter.pullPolicy	Optional	IfNotPresent	The Exporter image pull policy.
exporter.ports.containerPort	Optional	8888	The Exporter container port.
exporter.resources	Optional	{}	CPU/Memory resource requests/limits for Metrics exporter container
exporter.extraVolumeMounts	Optional	[]	Specify the Additional VolumeMounts to be mounted in Exporter container. Specify the volumes in extraVolumes
openshift	Optional	false	Set this argument if OpenShift environment is being used.
disableOpenshiftRoutes	Optional	false	By default Openshift routes are processed in openshift environment, this variable can be used to disable Ingress controller processing the openshift routes.
nodeSelector.key	Optional	N/A	Node label key to be used for nodeSelector option in CIC deployment.
nodeSelector.value	Optional	N/A	Node label value to be used for nodeSelector option in CIC deployment.
tolerations	Optional	N/A	Specify the tolerations for the CIC deployment.
crds.install	Optional	False	Unset this argument if you don't want to install CustomResourceDefinitions which are consumed by CIC.
crds.retainOnDelete	Optional	false	Set this argument if you want to retain CustomResourceDefinitions even after uninstalling CIC. This will avoid data-loss of Custom Resource Objects created before uninstallation.
analyticsConfig.required	Mandatory	false	Set this to true if you want to configure Citrix ADC to send metrics and transaction records to analytics .
analyticsConfig.distributedTracing.enable	Optional	false	Set this value to true to enable OpenTracing in Citrix ADC.
analyticsConfig.distributedTracing.samplingrate	Optional	100	Specifies the OpenTracing sampling rate in percentage.
analyticsConfig.endpoint.server	Optional	N/A	Set this value as the IP address or DNS address of the analytics server.
analyticsConfig.endpoint.service	Optional	N/A	Set this value as the IP address or service name with namespace of the analytics service deployed in k8s environment. Format: namespace/servicename
analyticsConfig.timeseries.port	Optional	30002	Specify the port used to expose analytics service outside cluster for timeseries endpoint.
analyticsConfig.timeseries.metrics.enable	Optional	False	Set this value to true to enable sending metrics from Citrix ADC.
analyticsConfig.timeseries.metrics.mode	Optional	avro	Specifies the mode of metric endpoint.
analyticsConfig.timeseries.auditlogs.enable	Optional	false	Set this value to true to export audit log data from Citrix ADC.
analyticsConfig.timeseries.events.enable	Optional	false	Set this value to true to export events from the Citrix ADC.
analyticsConfig.transactions.enable	Optional	false	Set this value to true to export transactions from Citrix ADC.
analyticsConfig.transactions.port	Optional	30001	Specify the port used to expose analytics service outside cluster for transaction endpoint.
nsLbHashAlgo.required	Optional	false	Set this value to set the LB consistent hashing Algorithm
nsLbHashAlgo.hashFingers	Optional	256	Specifies the number of fingers to be used for hashing algorithm. Possible values are from 1 to 1024, Default value is 256
nsLbHashAlgo.hashAlgorithm	Optional	'default'	Specifies the supported algorithm. Supported algorithms are "default", "jarh", "prac", Default value is 'default'
extraVolumeMounts	Optional	[]	Specify the Additional VolumeMounts to be mounted in CIC container
extraVolumes	Optional	[]	Specify the Additional Volumes for additional volumeMounts

Alternatively, you can define a YAML file with the values for the parameters and pass the values while installing the chart.

For example:

helm install my-release citrix/citrix-ingress-controller -f values.yaml

Tip:

The values.yaml contains the default values of the parameters.

Note:

Please provide frontend-ip (VIP) in your application ingress yaml file. For more info refer this.

Route Addition in MPX/VPX

For seamless functioning of services deployed in the Kubernetes cluster, it is essential that Ingress NetScaler device should be able to reach the underlying overlay network over which Pods are running. feature-node-watch knob of Citrix Ingress Controller can be used for automatic route configuration on NetScaler towards the pod network. Refer Static Route Configuration for further details regarding the same. By default, feature-node-watch is false. It needs to be explicitly set to true if auto route configuration is required.

This can also be achieved by deploying Citrix Node Controller.

If your deployment uses one single Citrix ADC Device to loadbalance between multiple k8s clusters, there is a possibilty of CNI subnets to overlap, causing the above mentioned static routing to fail due to route conflicts. In such deployments [Policy Based Routing(PBR)] (https://docs.citrix.com/en-us/citrix-adc/current-release/networking/ip-routing/configuring-policy-based-routes/configuring-policy-based-routes-pbrs-for-ipv4-traffic.html) can be used instead. This would require you to provide one or more subnet IP Addresses unique for each kubernetes cluster either via Environment variable or Configmap, see PBR Support

Use the following command to provide subnet IPAddresses(SNIPs) to configure Policy Based Routes(PBR) on the Citrix ADC

helm install my-release citrix/citrix-ingress-controller --set nsIP=<NSIP>,license.accept=yes,adcCredentialSecret=<Secret-for-ADC-credentials>,nsSNIPS='[<NS_SNIP1>\, <NS_SNIP2>\, ...]'

Citrix Node Controller by default also adds static routes while creating the VXLAN tunnel. To use [Policy Based Routing(PBR)] (https://docs.citrix.com/en-us/citrix-adc/current-release/networking/ip-routing/configuring-policy-based-routes/configuring-policy-based-routes-pbrs-for-ipv4-traffic.html) to avoid static route clash, both Citrix Node Controller and Citrix Ingress Controller has to work in conjunction and has to be started with specific arguments. For more details refer CNC-PBR-SUPPORT.

Use the following command to inform Citrix Ingress Controller that Citrix Node Controller is configuring Policy Based Routes(PBR) on the Citrix ADC

helm install my-release citrix/citrix-ingress-controller --set nsIP=<NSIP>,license.accept=yes,adcCredentialSecret=<Secret-for-ADC-credentials>,clusterName=<unique-cluster-identifier>,cncPbr=<True/False>

For configuring static routes manually on Citrix ADC VPX or MPX to reach the pods inside the cluster follow:

For Kubernetes:

1. Obtain podCIDR using below options:

   kubectl get nodes -o yaml | grep podCIDR
   

   • podCIDR: 10.244.0.0/24
   • podCIDR: 10.244.1.0/24
   • podCIDR: 10.244.2.0/24

2. Log on to the Citrix ADC instance.

3. Add Route in Netscaler VPX/MPX

   add route <podCIDR_network> <podCIDR_netmask> <node_HostIP>
   

4. Ensure that Ingress MPX/VPX has a SNIP present in the host-network (i.e. network over which K8S nodes communicate with each other. Usually eth0 IP is from this network).

   Example:

   • Node1 IP = 192.0.2.1
   • podCIDR = 10.244.1.0/24
   • add route 10.244.1.0 255.255.255.0 192.0.2.1

For OpenShift:

1. Use the following command to get the information about host names, host IP addresses, and subnets for static route configuration.

    oc get hostsubnet
   

2. Log on to the Citrix ADC instance.

3. Add the route on the Citrix ADC instance using the following command. add route <pod_network> <podCIDR_netmask> <gateway>

4. Ensure that Ingress MPX/VPX has a SNIP present in the host-network (i.e. network over which OpenShift nodes communicate with each other. Usually eth0 IP is from this network).

   For example, if the output of the oc get hostsubnet is as follows:

   • oc get hostsubnet

     NAME HOST HOST IP SUBNET os.example.com os.example.com 192.0.2.1 10.1.1.0/24

   • The required static route is as follows:

      add route 10.1.1.0 255.255.255.0 192.0.2.1
     

Uninstalling the Chart

To uninstall/delete the my-release deployment:

helm delete my-release

The command removes all the Kubernetes components associated with the chart and deletes the release.

Related documentation

• Citrix ingress controller Documentation
• Citrix ingress controller GitHub